Whether you play guitar, bass, keyboards or another stringed instrument, you\u2019ll need a direct box that won\u2019t diminish your instrument\u2019s tone, like the Direct Box Active and Direct Box Passive from Warm Audio. Every aspect of our direct boxes are designed for maximum sonic integrity, from the custom-wound CineMag USA transformer to the rugged metal knob and switches. You can expect warm, rich tone even after long cable runs, and the extruded aluminum enclosure ensures a long life span. When you need to convert an instrument-level signal to mic-level, with sonic quality as your top priority, you\u2019ll be well-served with the Direct Box Active and Direct Box Passive from Warm Audio.<\/p>\n
Built around world-famous CineMag USA Transformer topology and engineering, like no other DI Boxes in the world. Constructed with top-tier discrete components housed in rugged aluminum chassis\u2019 that include switches, knobs and connectors that are all designed to withstand heavy abuse on the road or in the studio.<\/p>\n
LIKE NO OTHER DI BOXES
\nThe Direct Box Active & Passive by Warm Audio are stunningly transparent. It will not diminish your instrument\u2019s original sound or tone in any way\u2026other than making it sound better.<\/p>\n
NEW DI BOX EXPERIENCE
\nRare versatility of having an onboard variable pad which attenuates your input signal anywhere from -3dB to -30dB. This allows you to easily tame any instrument\u2019s input source.<\/p>\n
TYPICAL APPLICATIONS FOR A DI BOX
\nConnecting electronic instruments such as guitar, bass, keyboard, or drum machines directly to a PA or recording system. Simply put, a DI box converts the high impedance, unbalanced output signals to low impedance, balanced output signals. By doing so, the instrument signals are now converted to the proper voltage level for the PA or recording system \u2013 which greatly reduces and\/or eliminates connections which could cause tonal shifts and distortion.<\/p>\n
DIRECT BOX ACTIVE vs. DIRECT BOX PASSIVE
\nDirect Box Active is best for instruments with passive pickups, especially acoustic instruments. The Direct Box Active can also operate in \u201cpassive\u201d mode. Direct Box Passive is best for balancing the signal of instruments with active electronics, but still performs extremely well on passive pickups by producing a frequency range that exceeds the bandwidth of most passive DI boxes on the market.<\/p>\n
DIRECT BOX ACTIVE \u2013 CONVENIENCE JACK
\nBoth of our Direct Boxes offer a Thru-put jack that is jumpered to the input jack. It is a convenience jack allowing you to send your instrument\u2019s signal to a second place in addition to the live mixer or recording device. Our Direct Boxes can also take a recorded signal at line level and send it to another line input while simultaneously sending signal out of the XLR mic level output of the Direct Box.<\/p>\n
A LOOK INSIDE
\nEvery aspect of our Direct Boxes are designed for maximum sonic integrity, from custom-wound CineMag USA transformers, to their metal switches and connectors, to their gold-plated circuit traces. You can expect warm, rich tones coming from these small, yet extremely rugged Direct Boxes.<\/p>\n
DIRECT BOX ACTIVE \u2013 SPECIFICATIONS<\/p>\n
\u2022 Custom-wound CineMag USA transformer.
\n\u2022 Converts instruments to mic-level signals without signal degradation.
\n\u2022 Ideal solution for plugging your instrument direct into any mic pre, mixer or recording device.
\n\u2022 Top-quality discrete components with gold-plated traces on circuit board.
\n\u2022 Rugged aluminum chassis construction.
\n\u2022 Pad: Variable from -3dB to -30dB.\u2022 Balanced Output: 600 ohms, mic level.
\n\u2022 Input Impedance: 1 Meg Ohms.\u2022 THD: .01% from 20Hz to 50Hz. Less than .003% from 50Hz to 20kHz.\u2022 Frequency Response: 10Hz to 90kHz +\/- 0.5dB.
\n\u2022 Linear Performance: +\/- 0.05dB 20Hz to 50kHz.
\n\u2022 Power: 48V Phantom or two 9V batteries. Can also be used passively.<\/p>\n
DIRECT BOX PASSIVE \u2013 SPECIFICATIONS<\/p>\n
\u2022 Custom-wound CineMag USA transformer.
\n\u2022 Converts instruments to mic-level signals without signal degradation.
\n\u2022 Ideal solution for plugging your instrument direct into any mic pre, mixer or recording device.
\n\u2022 Top-quality discrete components with gold-plated traces on circuit board.
\n\u2022 Rugged aluminum chassis construction.
\n\u2022 Pad: Variable from -3 to -30dB.
\n\u2022 Balanced Output: 600 ohms, mic level.
\n\u2022 Input Impedance: 1 Meg Ohms.
\n\u2022 THD: .01% from 20Hz to 100Hz. Less than .004% from 100Hz to 20kHz.
\n\u2022 Frequency Response: 20Hz to 70kHz +\/- 0.5dB.<\/p>\n
PRICE
\nActive: $199 MSRP
\nPassive: $149 MSRP<\/p>\n
Learn more about Warm Audio Direct Boxes here: https:\/\/warmaudio.com\/direct-boxes\/<\/a><\/p>\n
![\"DI-BOX-ACTIVE-REAR-VIEW-72DPI\"](\"https:\/\/i0.wp.com\/thestudiolounge.com\/wp-content\/uploads\/2020\/01\/DI-BOX-ACTIVE-REAR-VIEW-72DPI.png?w=692&h=554&ssl=1\" "\\"DI-BOX-ACTIVE-REAR-VIEW-72DPI\\"")
<\/a> <\/div> <\/div> <\/div> <\/div>\n","protected":false},"excerpt":{"rendered":"